Stop Overnight Overcharging Before It Starts
Leaving your phone plugged in all night is a habit most of us can’t break — but it’s also one of the fastest ways to wear down a battery. The FEEKI Full Charge Disconnector plugs the gap between convenience and battery health: it sits between your charger and your device, detects when charging is actually complete, and physically pulls itself free so nothing keeps trickling power into a full battery.
Built with PD 100W fast charging support and a zinc-alloy, ice-feel casing, it works across phones, tablets, laptops, earbuds, shavers, and pretty much anything charging over Type-C — so you can charge fast and walk away without worrying about it.
PD 100W Fast Charging
Dual Light Modes
Universal Type-C
Battery Health Protection
One Device, Two Charging Personalities
A single button switches between white light mode for screened, always-on devices like phones and tablets, and blue light mode for screenless gear like earbuds, power banks, shavers, and beauty devices — so the disconnector reads each device correctly instead of guessing.
It works with iPhone 17/16/15 series, MacBook, iMac, Pixel, Galaxy, and Android phones, plus Bluetooth earphones, electric shavers, and kids’ toys — anything charging over a Type-C port.
Two Simple Ways to Set It Up
Scenario 1: Plug the disconnector straight into your charging adapter, then plug your device in as usual. Once it’s fully charged, the disconnector automatically ejects itself from the adapter.
Scenario 2: Plug the disconnector’s output into your adapter, then connect your charging cable to the disconnector instead. Same result — full charge triggers an automatic, physical disconnect.
Built With Function in Mind
A Physical Cutoff, Not Just a Warning Light
Once the disconnector detects a full charge, it physically separates itself from the power source — the cutoff is visible and mechanical, not something buried in software you have to trust blindly.
Made from a silicone memory material that won’t scratch or damage your ports, it’s built to isolate risks like electrical leakage or overheating, so you can leave a device charging overnight without babysitting it.
Works With Your Existing Cable
No need to buy a special cable to use this. Connect the disconnector’s output port to your adapter, then plug your own Type-C data cable into the disconnector to charge your device as normal.
The moment your device hits full charge, the same automatic ejection kicks in — the disconnector detaches from the adapter and power stops flowing.
100% on Screen Isn’t Always 100% Charged
Phones and tablets keep trickle-charging for 10–50 minutes after hitting 100% on screen. In white light mode, the disconnector waits through that window before ejecting — for screenless devices in blue light mode, it ejects about 5 minutes after full charge.
If it disconnects early on a smartphone (around 80%), check Settings → Battery → Charging and turn off Battery Optimization, which can interfere with the current reading.
Watch It Auto-Disconnect
The Honest Breakdown
- Physically disconnects power — not just a software timer
- PD 100W fast charging support
- Works with screened and screenless devices via two modes
- Compatible with iPhone, Android, MacBook, earbuds, and more
- Built-in temperature control reduces heat damage
- Self-test function to confirm it’s working correctly
- Trickle-charge window means it’s not instant at 100%
- Battery Optimization settings can trigger early disconnects
- Requires picking the correct light mode for your device
- Adds a small extra connector between charger and cable
How It Stacks Up Against Charging Without It
| Feature | FEEKI Disconnector | Charging Without It |
|---|---|---|
| Overcharge Protection | Automatic physical cutoff | Relies on device software only |
| Overnight Charging | Safe to leave unattended | Continuous trickle power all night |
| Device Types Supported | Screened + screenless via 2 modes | Varies by device |
| Charging Speed | PD 100W supported | Depends on adapter |
| Heat Management | Built-in temperature control casing | No added heat protection |
Full Specs at a Glance
| Specification | Details |
|---|---|
| Material | Zinc Alloy + Ice-Feel Casing |
| Port Type | Type-C Input & Output |
| Input Rating | 5V–28V |
| Output Rating | 5V–28V |
| Fast Charging | PD 100W Supported |
| Modes | White Light (screened) / Blue Light (screenless) |
| Auto-Disconnect Time (Screened) | ~10–50 min after 100% display |
| Auto-Disconnect Time (Screenless) | ~5 min after full charge |
| Function Check | Hold button 5 seconds during charging |
| Compatible With | iPhone 17/16/15, MacBook, iMac, Pixel, Galaxy, Android phones, Bluetooth earphones, shavers, toys, laptops |
A Small Gadget That Protects an Expensive Battery
The FEEKI Full Charge Disconnector solves a problem most people don’t think about until their battery health starts dropping — it takes overnight overcharging out of the equation with a real, mechanical cutoff instead of a software promise.
If you plug in and walk away — or forget your phone charging overnight more often than you’d like to admit — this is a cheap way to protect the battery in every device you own.